External Bd Burner

SABRENT SBT-STDB IDE Ultra ATA-100/133 to Serial ATA (SATA) Port Mini Converter Adapter - Convert SATA Devices to IDE port on your desktop! Convert High Capacity SATA Hard Drives and SATA Storage Devices to operate with IDE Host Controller! Attaches this Mini size Dangle board to the back of all types of Serial ATA Devices, such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW, and connect them to an IDE host Controller. This Bridge Board is a converter solution for Serial ATA Devices. It has a standard 22 pin SATA port which can interface to a Serial ATA device (hard disk, CDROM, DVD, CD-RW, etc). It accepts Parallel ATA (IDE) commands through the 40 pin IDE connector from the host, decodes the commands and converts them to a Serial ATA commands to the device. Response from the device through the SATA bus are deciphered, processed and converted to a prallel ATA protocol and sent to the host. 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB Mini Board size (75mm x 26mm), No space wasted Compliant with Serial ATA 1.0a specifications Supports Spread Spectrum in receiver Compliant with ATA specifications Compatible with Ultra ATA 133 / 100 / 66 / 33 ***100% hardware bridge converter to support PC, MAC and Linux environment*** Retail Package Content: IDE Ultra ATA-100/133 to Serial ATA (SATA) Mini Converter Adapter Male/Female Y Large Molex Power connector (8-inch length) Quick Installation guide

Brand: Sabrent Model: SBT-STDB Number of items: 1 Dimensions: 1.30" h x 5.50" w x 7.90" l, .10 pounds Converts SATA devices to work with IDE controllers SATA provides transfer rates of 1.5 Gbps Support for hard drives larger than 137 GB Plug-and-play installation

Use the Sabrent SBT-STDB IDE Ultra ATA-100/133 to Serial ATA Port Mini Converter Adapter to convert Serial ATA (SATA) devices to work with an IDE controller. Serial ATA supports transfer rates of up to 1.5 Gbps and the adapter is compatible with SATA devices such as hard disks and DVD, DVD-RAM, CD-ROM, and CD-RW hard drives. Hard drives larger than 137 GB are supported. On one end of the adapter is a 22-pin SATA port and the other end has a 40-pin IDE connector. Simply connect them and the adapter will convert commands from one to the other. What's in the Box SBT-STDB IDE Ultra ATA-100/133 to SATA converter adapter, Y-type power cable, and quick installation guide.

Most helpful customer reviews 4 of 4 people found the following review helpful. ROLLED THE DICE.......SNAKE EYES By Robert M. Caudle WELL NO LUCK FOR ME WITH THIS PRODUCT. I ASSEMBLE MY OWN COMPUTERS, SET THIS DEVICE CORRECTLY, THE COMPUTER RECOGNIZES THE DRIVE AND INSTALLS THE OS BUT THEN THE MBR IS CORRUPTED. MY GUESS IS THIS DEVICE MAY WORK BETTER FOR SECONDARY DRIVES THAT DO NOT CONTAIN THE OPERATING SYSTEM. 1 of 1 people found the following review helpful. Not for Blu ray By Juan Carlos Rubio This converter does not work for Blu ray drives. BIOS and Vista Ultimate immediately recognized it, but when I put in a Blu ray movie it NEVER played! 1 of 1 people found the following review helpful. It works, but not as advertised By J. Knapp Running this adapter on an Intel D945GCLF2 with a Cavalry 64GB SSD. When using 80 conductor IDE cables (ATA-100 on my board), I experienced severe data read issues. As soon as I switched to a UDMA-33 cable (40 conductor), the drive reads were fine. This adapter is rated at ATA-100/ATA-133, but don't you believe it! That said, even at UDMA-33, performance is acceptable, and I purposely went for the cheap adapter & SSD drive. BTW, the SSD drive performed marvelously on a SATA port - Windows Storage Server 2008 desktop loaded in just under 4 seconds after reboot and logon... =0 See all 12 customer reviews...